Support for ABS – with spool – White – Bambu Lab
Feature
- Easy support removal
- Superior quality of the support interface
- Comes with a high temperature reusable spool
- Diameter: 1.75 mm +/- 0.05 mm
- 500 g.
Warnings for use
- Used ONLY for maintenance
- Not necessarily dried before use
- Closed printers required
- Compatible with AMS
- AMS lite NOT compatible
Note: Before you start printing, please read the printing tips for optimal results.
Easy removal of sports
Specifically designed for ABS, our support material adheres precisely to the ABS surface, allowing for easy support removal. This optimizes your post-processing workflow, ensuring a more efficient workflow.
Superior quality support interface
ABS support allows 0 Top Z spacing and 0 Top interface spacing when printing, providing a scar-free support surface. This enhances sharpness of detail, improving the overall appearance and integrity of your final prints.
RFID for smart printing
All print parameters are embedded in the RFID, which can be read via our AMS (Automatic Material System).
Load and print! No more tedious setup steps.
Comparison of parameters
Learn more about the comparison of different threads in The Bambu Thread Guide >>
Support for PLA/PETG | Support for PLA | Support for ABS | Support for PA/PET | PVA | |
Colour: | Natural | White and Black | White | Green | Transparent |
Nozzle type: | All sizes and materials | All sizes and materials | Hotend with hardened steel nozzle 0.4 mm/ 0.6 mm/ 0.8 mm Hotend with stainless steel nozzle 0.4 mm |
Hotend with hardened steel nozzle 0.4mm / 0.6mm (recommended) / 0.8mm | All sizes and materials |
Nozzle temperature: | 190 – 220 °C | 220 – 230 °C | 240 – 270 °C | 280 – 300 °C | 220 – 250 °C |
Bed temperature: | 35 – 60 °C | 35 – 45 °C | 80 – 100 °C | 80 – 100 °C | 35 – 45 °C |
Print speed: | < 100 mm/s | < 200 mm/s | < 100 mm/s | < 100 mm/s | < 200 mm/s |
Solubility: | Water Soluble | Water Soluble | Water soluble, Soluble in citric acid | Water Soluble | Water Soluble |
Drying before use: | Optional | Optional | Optional | Required | Required |
Dry protection during use: | Optional | Optional | Optional | Required | Required |
Filament compatibility: | PLA, PETG | PLA | ABS | PAHT-CF,PA6-CF,PA6-GF, PET-CF | PLA, PETG |
Compatibility of accessories
Recommended : |
Not recommended : | |
Backing: |
Smooth PEI pad , Textured PEI pad
|
Cool pad SuperTack |
Hotend: |
Hotend with hardened steel 0.4 mm/ 0.6 mm/ 0.8 mm Hotend with stainless steel 0.4 mm |
Hotend with hardened steel 0.2 mm Hotend with stainless steel 0.2 mm |
Bambu liquid glue / glue stick / EcoFixy glue | Bambu liquid glue / glue stick / EcoFixy glue | / |
Recommended print settings : | |
Drying settings (shock drying oven): | 55 °C, 8 h. |
Printing and maintaining the humidity of the container: | < 20% RH (Sealed, with desiccant) |
Nozzle temperature: | 240 – 270 °C |
Bed temperature (with adhesive) | 80 – 100 °C |
Print speed: | < 100 mm/s |
Physical properties : | |
Density: | 1.16 g/cm³ |
Vicat softening temperature: | N/A |
Heat deflection temperature: | N/A |
Melting temperature: | 195 °C |
Melting index: | 11.6 ± 0.7 g/10 min. |
Mechanical properties: | |
Tensile strength: | N/A |
Fracture extension rate: | N/A |
Bending module: | N/A |
Bending force: | N/A |
Impact Force: | N/A |
Printing tips
– ABS support is soluble in limonene. Please pay attention to the norms of use and safety.
– Sharp and unpleasant odours may be emitted during printing. Make sure the printer is closed and placed in a well-ventilated area.
– When layer strength is required, it is recommended to increase the wash volume to over 800 mm³. If the washout is not thorough, it may reduce the adhesion of the model layer at surfaces that are in the same horizontal plane as the support surface.
– By increasing the “speed of the initial layer”, a more peelable support can be obtained. However, this will increase the risk of distortion.
– Dry before use for higher print quality. Drying conditions: 80℃ for 4 hours in the shock dryer; 85-95℃ for 6 hours in the X1 series heater. Please refer to WIKI for filament drying instructions.
– For more support-related settings, please see Support in WIKI.
What’s in the box?
There are no reviews yet.