FiberFlex-30D-Gray-сиво-850g

FiberFlex-30D-Gray-Grey-850g-Fiberlogy

FiberFlex 30D is our offering for people who are interested in 3D printing with flexible filament with reduced rigidity. This is the second filament in the FiberFlex family whose resilience allows you to create 3D printing in projects that require rubber-like properties. Therefore, any project requiring resistance to bending, crushing or stretching may require the use of this material. 3D printing with 30D flexible filament requires some experience in the field and a suitable 3D printer. Therefore, this extremely soft material, as TPU filaments are, can be problematic for beginners. The use of a direct drive extruder and speed reduction is highly recommended. Reducing the pressure on the extruder gear can also help achieve a successful print. Дother flexible filament offerings with a stiffness greater than 30D are Fiberlogy FiberFlex 40D and Fiberlogy MattFlex 40D.

APPLICATIONS:

• MACHINE SEALS: seals, elements that often bend
• JUDGES OR THEIR ELEMENTS: phone cases, watches, heart rate monitors, pedometer straps
• RELATED ITEMS: flexible hinges
• TOYS OR THEIR ELEMENTS: tyres, rubber figures
• BANDS: bands, bracelets

Properties :

• Вhigh impact resistance.
• Very good thermal, chemical and abrasion resistance at low temperatures.
  

How to print FiberFlex 30D?

The following parameters are only a suggestion of print settings for this material. To ensure the best print quality, it is necessary to select the appropriate settings for the specific printer and printing conditions.

• Nozzle temperature 200-220°C
• Bed temperature 50-70°C
• No closed chamber required
• Fan 50-75%
• Flow rate 105-110%
• Print speed < 35 mm/s
• Surface glass, masking tape
• Retraction(direct) 1-2 mm
• Retraction speed 10-30 mm/s
• Drying conditions 60°C / 4h

Note: It is recommended to heat the bed to 110°C for easier removal of the workpiece.