PC Black 1000g Bambu Lab
Compatibility with accessories
| Recommended | Not recommended | |
|---|---|---|
| Print plate | Smooth PEI plate, Textured PEI plate | Cool Plate SuperTack |
| Hotend | All sizes / materials | / |
| Glue | Glue Stick | Bambu Liquid Glue |
RFID for smart printing:
All printing parameters are stored in an RFID chip
Can be automatically read by AMS (Automatic Material System)
Simply load and print – no manual settings required
Recommended print settings
| Drying (dryer): 80°C, 8 hours |
| Printing and storage humidity: < 20% RH (in a sealed container with a moisture absorber) |
| Nozzle temperature: 260-280°C |
| Bed temperature (with adhesive): 90-110°C |
| Print speed: < 300 mm/s |
Physical properties
| Density: 1.20 g/cm³ |
| Vicat softening point: 119°C |
| Thermal deformation temperature: 117°C |
| Melting point: 228°C |
| Melting index (MFI): 32.2 ± 2.9 g/10 min |
Mechanical properties
| Tensile strength: 55 ± 4 MPa |
| Elongation at break: 3.8 ± 0.3 % |
| Bending modulus: 2310 ± 70 MPa |
| Flexural strength: 108 ± 4 MPa |
| Impact strength: 34.8 ± 2.1 kJ/m² |
Printing tips
- Due to the transparent properties of the filament, Lidar Extrusion Calibration can be affected when printing with Transparent PC
- Bambu PC requires good drying before printing:
- – Recommended drying: 80°C for 8 hours in a blast drying oven
- – Alternative: 100°C for 12 hours on a heated printer platform
- For more information: see the Filament Drying Guide (WIKI)
What’s in the box
- 1 × Filament (spula)
- 1 × RFID chip (built-in)
- 1 × Desiccant
- 1×Original Bambu Lab packaging
There are no reviews yet.