TPU for AMS – Grey – Bambu Lab
Bambu TPU for AMS
Bambu TPU for AMS redefines your TPU printing experience with improved performance and seamless integration with AMS. Ideally suited for vibrant multi-color projects, it opens up exciting possibilities in printing with flexible materials. With a Shore hardness of 68D, Bambu TPU for AMS offers impressive durability while minimizing filament formation, providing the ease of printing with PLA along with the flexibility and durability characteristic of TPU.
Seamless integration with AMS and AMS lite
Optimized for use with the AMS system, Bambu TPU for AMS enables smooth and reliable multi-color printing with flexible materials.
Seamless integration with AMS and AMS lite
Optimized for use with the AMS system, Bambu TPU for AMS enables smooth and reliable multi-color printing with flexible materials.
Goodbye, TPU Stringing
Say goodbye to stringing with Bambu TPU for AMS! Its special formulation significantly reduces common stringing problems inherent in traditional TPU, ensuring crisp, clear detail on every print for smoother, more reliable printing.
Fast printing with TPU
Bambu TPU for AMS delivers up to 60% faster print speeds compared to Bambu TPU 95A HF, increasing efficiency without compromising quality. Get more done in less time with fast and reliable results!
| Bambu TPU for AMS | Bambu TPU 95A HF | |
|---|---|---|
| Nozzle temperature (°C) | 230 | 230 |
| Max. volumetric flow rate (mm³/s) | 18 | 12 |
| Print speed (mm/s) | Up to 238 | Up to 147 |
| Model for test | Diameter: 50mm Height: 100mm Fill: 40% | |
Application tips
The elasticity of the TPU footprint is related to the Wall Loops and Sparse Infill Density settings. The higher the walls or infill density, the lower the elasticity and vice versa.
Compatibility of accessories
| Recommended | Not recommended | |
|---|---|---|
| Printing plate | Smooth PEI plate, Textured PEI plate | Cool Plate SuperTack |
| Hotend | Hardened steel nozzle 0.4 mm / 0.6 mm / 0.8 mm Stainless steel nozzle 0.4 mm Stainless steel (0.4 mm) |
Hardened steel nozzle 0.2 mm Stainless steel nozzle 0.2 mm |
| Glue | Bambu Liquid Glue Dry Glue |
/ |
| AMS & AMS lite | AMS & AMS lite | / |
TPU for the AMS hexadecimal code table
| Colour | HEX code | View |
|---|---|---|
| Red | #ED0000 | |
| Yellow | #F9EF41 | |
| Blue | #5898DD | |
| Neon green | #90FF1A | |
| White | #FFFFFF | |
| Grey | #939393 | |
| Black | #000000 |
RFID for smart printing
All printing parameters are embedded in the RFID, which can be read by our AMS (Automatic Material System).
Load and print! No more tedious setup steps.
| Recommended print settings | Physical properties | Mechanical properties |
|---|---|---|
| Drying (in oven): 70 °C, 8 h | Density: 1.26 g/cm³ | Tensile strength: 22.4 ± 0.6 MPa |
| Storage humidity: < 20% RH (sealed, with desiccant) | Vicat softening temperature: No data | Elongation at break: > 650% |
| Nozzle temperature: 220 – 240 °C | Heat deflection temperature: No data | Bending modulus: No data |
| Bed temperature (with glue): 30 – 35 °C | Melting temperature: 183 °C | Bending strength: No data available |
| Print speed: < 250 mm/s | Melt index: 21.8 ± 0.3 g/10 min | Impact strength: No data |
Printing tips
– Dry before use for higher print quality. TPU for AMS should be dried before use and stored in a dry place during the printing process to prevent filament formation.
– Drying conditions: 70 °C for 8 hours in a drying oven or 80 °C to 90 °C for 12 hours on the heating platform of the X1 printer. For more details, please refer to: Filament drying instructions on WIKI.
– Storage tip: To prevent moisture absorption from the filament, use an airtight storage container with a desiccant during printing.
What’s in the box
There are no reviews yet.