A1 Bambu Lab

A1 Bambu Lab

Quick nozzle change

All new design for quick change of the hotend, attaches and removes with just 1 clip.

Active motor noise suppression

A1 can calibrate parameters to meet the small individual differences between each drive motor. This compensates for the unwanted force of the motor noise.

Bed Slinger, with CoreXY speed and quality

All-metal rails, rigid frame, nozzle pressure sensor, accelerometers, powerful MCU, and most of all an advanced motion control system that uses these features to print 14-minute benches of quality and to all speed rules, straight out of the box, without using specialized filaments.

Technical characteristics of A1

Bambu Lab A1

Technical specification

Body
Housing volume: 256*256*256 mm³
Chassis: Steel + extruded aluminium

ToolHead
Hot end: all metal
Extruder Gears:Hardened Steel
Nozzle: stainless steel
Maximum hot end temperature: 300℃
Nozzle diameter (included): 0.4 mm
Nozzle diameter (optional): 0.2 mm, 0.6 mm, 0.8 mm
Thread cutting part: yes
Thread diameter: 1,75 mm

Heating bed
Compatible build plate:

Bambu’s textured PEI pad
Bambu Smooth PEI pad
Bambu high temperature pad (smooth PEI)
Bambu Cool pad

Speed
Maximum speed : 500 mm/s
Maximum acceleration : 10000 mm/s²
Maximum flow rate of the host: 28 mm³/s @ABS (Model: 150*150 mm single wall;
Material:Bambu ABS; Temperature:280℃)

Cooling
Cooling fan: closed cycle
Hotend fan: closed cycle

Supported filament:
PLA, PETG, TPU, PVA: ideal
ABS, ASA, PC, PA, PET, carbon/glass fiber reinforced polymer: Not recommended

Sensors
Surveillance camera: low speed camera (up to 1080P) Time interval supported
Thread exhaust sensor: yes
Thread odometry: yes
Power Loss Recovery: yes
Thread tangle sensor: yes

Dimensions
Dimensions: 385*410*430mm³
Net weight: 8,3 kg

Electrical parameters
Input voltage: 100-240 VAC, 50/60 Hz
Maximum power: 1300W@220V，350W@110V

Electronics
Display: 3.5 inch 320*240 IPS touch screen
Connectivity: Wi-Fi, Bambu-Bus
Storage: micro SD card
Control Interface: touch screen, APP, PC application
Motion controller: dual-core Cortex M4

Software
Slicer: Bambu Studio Support for third-party sliders that export standard
Gcode, such as Superslicer, Prusaslicer and Cura, but some
advanced features may not be supported.
Supported operating systems: macOS, Windows

Wi-Fi
Frequency range: 2412 MHz – 2472 MHz (CE)
2412 MHz – 2462 MHz (FCC)

2400 MHz – 2483.5 MHz (SRRC)
Transmitter power (EIRP): ≤ 21.5 dBm (FCC)
≤ 20 dBm (CE/SRRC)
Protocol: IEEE 802.11 b/g/n