RepRap M6 hardened steel nozzle 0,4 mm – 1,75 mm – 1 pcs.

RepRap M6 hardened steel nozzle 0,4 mm – 1,75 mm – 1 pcs.

High quality

All PrimaCreator nozzles are made from the finest high quality brass or steel (depending on type) and are finished in a state of the art factory. All nozzles are manufactured to a tolerance of less than ±0.01mm. This means your filament will have a very smooth and clean surface when extruded, which of course results in better prints.

After this process, the material is passed through an ultrasonic cleaning bath, then cleaned again and protected from surface oxidation.
The nozzle will now take shape with millimetre accuracy, with a tolerance of less than ±0.01mm.
The process of removing the sharp edges from the nozzles is a very important step as this makes up a large part of the result. If too many sharp edges are left on the nozzle, it will become more prone to clogging. Therefore, it is important that the nozzle is very smooth and clean before it is used. In each batch, a few nozzles are selected and cut in half to ensure that all specifications are met and that the surface is in perfect condition.
The nozzles are then inspected one last time and individually packaged in a protective box – ready to be shipped to you.
0 = 0.20 mm
3 = 0.40 mm
4 = 0.60 mm
5 = 0.80 mm

References

For best results and optimal print quality, we highly recommend re-leveling your build plate after replacing the nozzle with a new one. Note that the PrimaCreator nozzle may be compatible with your printer, but the distance between the nozzle and build plate must be adjusted.
The process

The PrimaCreator nozzle manufacturing process begins with a selected high-quality material. When the material reaches the factory, an optical inspection is first made of the material to be used for each batch of nozzles. Then it’s time to press the material, in other words, turn it into a long rod. In our process this is only done once, and in many other (cheaper) cases this process has to be repeated several times, often as many as 3-4 times, and yet the same results are not obtained.