PrimaCreator CMYK Pigment Set (4 x 30 ml)

PrimaCreator CMYK Pigment Set (4 x 30 ml)

Create your own colour!

The PrimaCreator CMYK pigment set is designed for use with any brand of clear or white resin, but for best effect we recommend PrimaCreator or CopyMaster3D. It is used to be able to create custom colors to suit individual needs. These pigment dispersions are designed to work with 3D printing applications where UV light is used to cure the resin layer by layer.

Highlights

• Unleash your creativity and create your own colours.
• Perfect for mixing with clear or white resin.
• Any colour combination is possible

The PrimaCreator CMYK pigment set is designed for use with any brand of clear or white resin, but for best effect we recommend PrimaCreator or CopyMaster3D. It is used to be able to create custom colors to suit individual needs. These pigment dispersions are designed to work with 3D printing applications where UV light is used to cure the resin layer by layer.

Shake well before each use. Slowly drip the pigment solution into your chosen resin and mix well until the desired colour is achieved. To get the same color density of our pigmented regular resin, you will need to add approximately 4 ml of the pigment dispersion. Make sure you do not add too much, as adding too much pigment can result in a slower cure and possibly prevent the cure completely.

The pigment solution can be added to our white or clear resin depending on the finish you wish to obtain. When added to the white base resin, an opaque finish will result. If added to the clear resin, a transparent look will be obtained. The more pigment you add, the more saturated the color will become.

Please be extremely careful when handling the pigments as they stain very easily, use gloves to avoid staining your skin.

Pigment dispersions are safe to use, but it is always recommended to read and understand the safety and technical information before use.