PEEK-300 – CreatBot
Direct hardening system
Direct Annealing System (DAS), the world’s first and exclusive CreatBot technology.The annealing process is instantly controlled during printing. It is designed to provide the best quality of details simultaneously, without distortion and cracking when printing functional materials of large sizes. (The technology is patent protected and is only available from CreatBot)
Characteristics of DAS hardening process :
1）Fast: finished during the printing process, no need for secondary processing in the oven.
2）Full: The annealing process applies to each extruded filament, not to the entire printed pattern. The internal structure of the entire model cannot be fully crystallized or it will deform in the oven.
3）Controllable: the ambient temperature can be adjusted within the range of 0-200 °C. Different durability and strength requirements can be met by adjusting the DAS temperature function in different parts of the material.
Before baking
After baking
Before baking
After baking
Large printing space
The PEEK-300 has an impressive print space of 300x300x400 mm. The ability to print PEEK in this size is very good.
Intelligent two extruders with automatic 480℃ rise
The PEEK-300 is equipped with CreatBot’s new technology – intelligent twin extruders with automatic rise. Water cooling, DAS system, automatically rising extruders. The temperature of the double nozzles reaches 480°C. You can print any material for 3D printers in the world. We can say that this is the best choice of polymer materials.
Liquid cooling
The cooling system is one of the most important components of a printer, and even more so of a printer that can reach high temperatures. The PEEK-300 has a newly developed liquid cooling system that causes water to circulate at the hot end and maintain optimum temperature.
Air pump cooling
To support the PEEK-300 liquid cooling system, there is also an air pump cooling system. The feature that sets this printer apart from others is that it takes in cool air from the outside, rather than just using the hot air inside the printer.
Thread detection system
If you run out of filament during 3D printing, don’t worry. The 3D printer will go into pause mode and allow you to change the filament – then just press the resume button, easy!
What printing materials are available to you?
Engineering plastics: PLA, PC, ABS, PA6, PETG, PVDF, POM-C, PP, TPU
High temperature materials: PPSU, PEI (ULTEM), PA12, PSU, PPS, PA-CF
Materials with ultra-high performance: Medical grade PEEK, PEEK, PEKK, PEEK-CF (carbon fiber), PEEK-GF (glass fiber), etc.
Continuous 3D printing
In the event of an unexpected power loss, the PEEK-300 remembers the last known position, stores it, lowers and retracts the thread. When power is restored, you can continue 3D printing.
Triple thermal insulation
Triple thermal insulation consists of double insulation chamber, advanced insulation materials and vacuum double computer boards. It is a guarantee of outstanding performance and safety.
High temperature chamber 120°C
Exclusive and essential.
The defender of the seal without cracking.
HEPA air filtration
The air filtration system can adsorb the dirt and gas generated by the printing of special filaments, which is safer and more environmental protection and more suitable for home, school and office.
Printing in single and double extrusion mode
Product Description
- Volume for single extrusion: 300*300*400 mm
- Double extrusion: 240*300*400 mm
- Thread diameter 1,75 mm
- Number of nozzles Double extruder
- Nozzle diameter 0.4 mm (0.3 ~ 1.0 mm optional)
- Filament Compatibility Engineering plastics:PLA, ABS, ASA, PC, Nylon, PETG, PVDF, TPU, Carbon fiber；
- High temperature materials: UltraPA, UltraPA-GF, UltraPA-CF, PPSU, PEI(ULTEM)；
- Ultra-high performance material: PEEK, CF-PEEK (carbon fiber), GF-PEEK (glass fiber), PEKK, etc.
Temperature
- Max nozzle. Temperature 480℃
- Chamber temperature 120℃
- Platform Max. Temperature 200℃
- Direct annealing temperature 0~400℃
Speed
- Best print speed 55 mm/s
- Max. Print speed 180 mm/s
Electricity
- Input power 200V~240V, 20A
- Rated power 4600W
- Screen 4.3-inch full-colour touchscreen, multilingual
- Print method USB connectivity/USB drive
Mechanical
- Cooling Air pump cooling and water cooling
- PCB Aluminum+PEEK printed circuit board
- X-axis Y positioning accuracy 0.0127 mm, Z-axis 0.00125 mm
- Direct extruder drive
- Machine construction Fully enclosed hot chamber
- Manual/automatic bed levelling
Software
- Software Creatware, Simplify3D, Cura, Slic3r
- Operating systems Windowsall, macOS
- Print file type STL, OBJ, AMF, Gcode
Special feature
- Restored interrupt Save data at power off
- Filament detection Stop printing when you run out of filament
- Direct Annealing System (DAS) The annealing process can be controlled immediately during printing. It is designed to provide the best quality parts in one time without deformation and cracking when printing functional materials of large sizes.
- Thermal insulation Triple thermal insulation
- Emergency stop switch Emergency stop maintenance
- High temperature accessories High temperature resistant motors, linear rails, belts and chains to ensure long lasting high temperature printing.
Size and weight
- Machine size 650*600*750 mm
- N.W 100 kg
- Package size 820*720*1080 mm
- Total mass 145 kg
There are no reviews yet.