Dental resin for castings – green Elegoo 0.500 g.

Dental resin for castings – green Elegoo 0.500 g.

Product Features:

Shrinkage rate（%）: 0.2-0.5

Maximum strength（KGF）: 129.32±10%

Tensile strength（MPA）: 31.285±10%

Elongation at yield point (%): 6.322±10%

Elongation at break（%）: 8.852±10%

Flexural strength(MPa): 39.721±10%

Compressive flexural modulus (MPa): 811.072±10%

Shore hardness（D）: 85-88

Impact resistance in slicing（j/m）: 135.66±10%

Tensile modulus (MPa): 434.5±10%

Viscosity（mPa-s）: 50-170

Absorption band: 385nm-410nm

Density（g/cm3）:1.05-1.25

USE：

1. Working temperature: 25~35℃,68℉~95℉

2. Shake well before each use. If the resin is very viscous, pre-heat the bottle with 60-80℃ warm water before shaking.

3. Please wear nitrile rubber gloves while working and keep the working environment well ventilated.

4. Do not use the resin near windows, balconies or other strong ultraviolet environment.

5. If you accidentally get resin in your eyes, mouth or nose, rinse immediately with plenty of water and consult a doctor.

6. Resin left on the skin can be washed off with soap, hand sanitizer, etc.

Waste liquid：

1. If the resin is no longer needed, please pour it into a transparent container (pour a small amount at a time)

then place it in the sun to harden completely.

2. If it is a cleaning liquid containing resin, please do not dispose of it directly into the drain.

You can first put the cleaning solution in the sun, wait until the resin inside hardens and settles completely,

and then filter the solid residue, and the filtered cleaning solution can be used continuously.

Storage：

1. Store in a closed, shady and cool place.

2. Keep away from fire.

3. Store out of reach of children.

4. If you do not need to use the resin within 1 day, please pour it into a clean, light-protected container and keep it tightly closed.

Do not mix the printed fluid with resin that has not been used to avoid contaminating the new resin.