PETG Premium- Glow in the dark/ Yellow- Green – Spectrum 1 kg.
PETG Premium- Glow in the dark/ Yellow- Green – Spectrum 1 kg.
PET-G – Glow in the Dark/ Yellow-Green Spectrum is a PET-G based filament mixed with a concentrated phosphorescent pigment. Accordingly, once the printed articles are exposed to an external light source, they will emit their own light. The material has all the typical characteristics of pure PET-G – the added pigment has a neutral effect on the material properties.
The addition of phosphorescent pigment to PET-G provides the following properties to the printed articles:
- ability to emit its own light after prior exposure to an external light source
- the ability to “control” the light intensity of printed articles by adjusting the wall thickness and filler density.
Tip: To achieve a stronger and longer lasting glowing effect, leave the model exposed to light for longer. The presence of phosphorescent pigment may also cause wear on the brass nozzles; therefore, the use of stainless steel nozzles is recommended for prolonged application of PET-G – Glow in the Dark/Blue Spectrum.
Technical data
- Material:PET-G
- Available diameter: 1.75 [mm]
- Diameter tolerance: +/- 0.03 [mm]
- Density: 1.27 [g/cm3]
- Thermal resistance: HDT B – 78°C
- Surface finish: glossy
- Check your reel: YES (online diameter graph – full reel length, average diameter, ovality, standard deviation individually for each reel produced)
Usage:
- Nozzle temperature: 230-255°C
- Bed temperature: 60-80°C
- Recommended print speed: 40-110 mm/s
- Recommended sheath thickness: 0.40 – 2.70 mm
- Recommended layer height: 0.05 – 0.30 mm
- Cooling: 75-100%
- Closed print chamber: not needed
- Dry box recommended: no
- Rubber or hardened nozzle recommended: no
- Adhesive: not necessary (for greater adhesion or to prevent deformation: Dimafix, 3DLac, Magigoo)
Material Characteristics:
- Incredibly strong afterglow effect
- high aesthetic surface quality
- warp-free printing
- perfect layer adhesion
There are no reviews yet.