Easy PETG – Transparent Burgundy – Fiberlogy

Easy PETG – Burgundy Transparent – Fiberlogy

Impressive simplicity:

The EASY PET-G filament is an interesting proposition for those looking for a combination of the ease of 3D printing with functional and aesthetic values. PET, enriched with the addition of glycol, provides high resistance to mechanical, chemical and atmospheric factors, and its high amorphousness, combined with very good flow, allows for prints with greater transparency and better layer bonding.

Printing with EASY PET-G filament is characterized by the absence of the disadvantages of working with classic PET-G: stringing, blistering and filament burn. Achieving stunning effects is as easy as using the EASY PLA filament on any 3D printer.

The aforementioned properties make EASY PET-G an excellent combination of the strength of traditional PET-G and the simplicity and predictability of EASY PLA so valued by 3D printer users.

EASY PET-G 1.75 mm is available in transparent and opaque versions in a wide range of colours. The bright colours and light reflection give the printed elements an attractive appearance that is perfectly suited for the production of decorative elements, housings for electronic components and all kinds of containers and ornaments.

APPLICATION IN 3D PRINTING:

• End use parts: containers, holders
• PROTOTYPES: bottles, packaging
• ELECTRONICS: covers, cases, products containing diodes
• DECORATIONS: lamps, glass-like elements
• Jewelry: rings, necklaces, bracelets

Properties:

• ease of printing
• high durability
• low susceptibility to shrinkage and delamination
• resistance to acids, salts, alkaline substances
• odourless

How to print?

The following parameters are only suggested print settings for this material. To ensure the best print quality, it is necessary to select the appropriate settings for a specific printer and printing conditions.

• Nozzle temperature 220-250°C
• Bed temperature 90°C
• No closed chamber required
• Fan 0-25%
• Flow rate 95-105%
• Print speed < 100 mm/s
• Surface masking tape
• Retraction (direct) 2-3 mm
• Withdrawal (Bowden) 3-5 mm
• Retraction speed 20-45 mm/s
• Drying conditions 60°C / 4h
• Remarks:
  Due to the strong adhesion to the bed, it is not recommended to print directly on its surface or on glass. This can lead to failure. We recommend using masking tape.