PETG – HF – Black – with spool – Bambu Lab
Bambu PETG HF
PETG HF is a fully optimized PETG filament designed specifically for high-speed printing. With a standard print speed that is twice that of standard PETG filaments, PETG HF takes your printing efficiency to new heights.
It effectively solves common problems such as chilling and clumping associated with conventional PETG, providing smoother, more reliable prints. The new matte finish not only improves aesthetics by smoothing out uneven gloss on speed transitions, but also provides a consistently uniform appearance.
Offering greater durability and strength than PLA, PETG HF is the ideal choice for creating long-lasting products with improved coating and shorter production times.
Designed for speed
Twice as fast as standard PETG*, PETG HF significantly increases your productivity without compromising print quality.
Print seamlessly with minimal setup
PETG HF stands out in terms of printability among PETG filaments with its higher adaptability to printers and print settings, achieving ideal print results without fine-tuning parameters. Thanks to advanced formulation optimization, PETG HF says goodbye to bleed and clumping, delivering smoother prints with crisp detail.
Smooth, soft texture
PETG HF delivers smooth texture and consistent gloss at any print speed, ensuring uniformity and sharp detail with every print.
Ready for outdoor use
PETG HF retains the inherent strengths of regular PETG, providing excellent resistance to water, UV and temperatures. Harder and more durable than PLA, with higher temperature resistance, it is the ideal choice for printing outdoor products such as planters, birdcages, cradles and automotive parts. It is also ideal for outdoor toys that require long-term exposure and the ability to withstand impacts, collisions and falls.
Compatibility of accessories
| Product | Recommended | Not recommended |
|---|---|---|
| Board | Cool Plate SuperTack, Smooth PEI Plate, Textured PEI Plate | |
| Hotend | All sizes / Materials | |
| Glue | Bambu Liquid Glue, Glue Stick |
PETG HF Hex Code Table
| Colour | HEX code | Image |
|---|---|---|
| Yellow | #FFD00B | |
| Orange | #F75403 | |
| Green | #00A42 | |
| Red | #EB3A3A | |
| Blue | #002E96 | |
| Black | #000000 | |
| White | #FFFFFF | |
| Creamy | #F9DFB9 | |
| Lime Green | #6EE53C | |
| Easy Green | #39541A | |
| Lake Sin | #1F79E5 | |
| Peanut Brown | #875718 | |
| Grey | #AD8B12 | |
| Dark Grey | #515151 |
| Recommended print settings | Physical properties | Mechanical properties |
|---|---|---|
| Drying Settings (Hot Air Dryer) | Density | Tensile strength |
| 65°C, 8 h | 1.28 g/cm³ | 34 ± 4 MPa |
| Humidity of the printing and storage container | Vicat softening temperature | Degree of elongation at break |
| < 20% RH (Sealed, with desiccant) | 70°C | 8.6 ± 1.2 % |
| Nozzle temperature | Heat deflection temperature | Bending modulus |
| 230 – 260°C | 69°C | 2050 ± 120 MPa |
| Bed temperature (with adhesive) | Melting temperature | Bending strength |
| 65 – 75°C | 214°C | 64 ± 3 MPa |
| Print speed | Melting index | Impact strength |
| < 300 mm/s | 28.2 ± 2.7 g/10 min | 31.5 ± 2.2 kJ/m² |
Printing tips
Dry before use for higher print quality. PETG HF should be dried before use and remain moisture-free during the printing process, especially for longer printing times (over 6 hours).
Drying conditions: 65℃ for 8 hours in the shock drying oven; 75-85℃ for 12 hours in the X1 series heater. For more details, please refer to: thread drying recommendations in WIKI. Please note that the bobbin can withstand the higher drying temperature of the heating bed.
What’s in the box?
There are no reviews yet.