Fiberlogy MATTE PET-G-Graphite
Brushed PET-G – durability and elegance
PET-G matt filaments are a new product in the Fiberlogy offer. It is a response to numerous inquiries from 3D printing enthusiasts. This modern PET-G filament is characterized by a unique, matte finish. It not only gives prints a sophisticated look, but also effectively masks the layers, enhancing the aesthetics of the final product.
Compared to PLA matt filaments, Matte PET-G offers much higher strength. As a result, it allows the creation of solid and durable prints with an elegant appearance. It is ideal for projects where aesthetics are as important as filament strength.
Matte PET-G is easy to work with, but to fully exploit its potential, it requires higher print temperatures between 250 and 270°C, especially for high-speed printing such as on BambuLab printers. These are key parameters to ensure optimum strength and excellent layer bonding. For best results, we recommend increasing the number of contours and fills in the cutter settings.
3D PRINTING APPLICATIONS:
- DECORATIONS: interior design elements, figurines, ornaments, vases
- HOBBIES: costume items, cosplay accessories
- UTILITIES: toys, desk organizers, containers
- GIFTS: phone stands, jewelry displays
| Diameter | Diameter tol | Oval Toll | Printing temperature | Temperature at substrate |
|---|---|---|---|---|
| 1.75 mm | +/- 0.02 mm | + 0.01 mm | 250-270°C | 90°C |
Properties of matt PET-G:
- matt finish
- easy printing
- low susceptibility to shrinkage and tearing
- resistance to acids, salts, alkaline substances
- excellent hiding of the layer lines
How to print EASY PET-G?
The following parameters are only suggested print settings for this material. To ensure the best print quality, it is necessary to select the appropriate settings for the specific printer and printing conditions.
| Nozzle temperature | 250-270°C |
| Bed temperature | 90°C |
| Closed chamber | Not required |
| Ventilaor | 0-25% |
| Debit | 95-105% |
| Print speed | < 100 mm/s |
| Surface | masking tape |
| Retraction (direct) | 2-3 mm |
| Retraction (bowden) | 3-5 mm |
| Speed of retraction | 20-45 mm/s |
| Drying conditions | 60°C / 4h. |
| Notes | Due to the strong adhesion to the bed, it is not recommended to print directly on its surface or on glass. This can lead to failure. We recommend you use masking tape. From April 2024, there is a change in the proposed printing temperatures. |
| Profiles | Bambu Lab X1C/P1S Bambu Lab P1P Bambu Lab A1 Bambu Lab A1 Mini |
There are no reviews yet.