Bambu Lab A1 Combo

Bambu Lab A1 Combo (AMS Lite included)

Quick nozzle change

All new design for quick change of the hotend, attaches and removes with just 1 clip.

Active motor noise suppression

A1 can calibrate parameters to meet the small individual differences between each drive motor. This compensates for the unwanted force of the motor noise.

Bed Slinger, with CoreXY speed and quality

All-metal rails, rigid frame, nozzle pressure sensor, accelerometers, powerful MCU, and most of all an advanced motion control system that uses these features to print 14-minute benches of quality and to all speed rules, straight out of the box, without using specialized filaments.

Technical characteristics of A1

Bambu Lab A1

Technical specification

Body
Body volume: 256*256*256 mm³
Chassis: Steel + extruded aluminium

ToolHead
Hot End: All Metal
Extruder Gears: Hardened Steel
Nozzle: Stainless Steel
Maximum Hot End Temperature: 300 ℃
Nozzle diameter (included): 0.4 mm
Nozzle diameter (optional): 0.2 mm, 0.6 mm, 0.8 mm
Filament cutting part: Yes
Filament diameter: 1.75 mm

Heating bed
Compatible build plate:

Bambu Textured PEI Pad
Bambu Smooth PEI Pad
Bambu High Temperature Pad (Smooth PEI)
Bambu Cool Pad

Velocity
Maximum velocity : 500 mm/s
Maximum acceleration : 10000 mm/s²
Maximum flow rate of Hotend : 28 mm³/s @ABS (Model : 150*150 mm single wall;
Material : Bambu ABS; Temperature : 280℃)

Cooling
Cooling fan: closed loop
Cooling fan: closed loop

Supported Filament:
PLA, PETG, TPU, PVA: Ideal
ABS, ASA, PC, PA, PET, Carbon/Glass Fiber Reinforced Polymer: Not Recommended

Sensors
Surveillance Camera: Low Speed Camera (up to 1080P) Time Interval Supported
Thread Depletion Sensor: Yes
Thread Odometry: Yes
Power Loss Recovery: Yes
Thread Entanglement Sensor: Yes

Dimensions
Dimensions: 385*410*430mm³
Net Weight: 8.3kg

Electrical parameters
Input voltage: 100-240 VAC, 50/60 Hz
Maximum power: 1300W@220V，350W@110V

Electronics
Display: 3.5 inch 320*240 IPS touch screen
Connectivity: Wi-Fi, Bambu-Bus
Storage: Micro SD card
Control Interface: Touch screen, APP, PC application
Motion Controller: Dual core Cortex M4

Software
Slicer: Bambu Studio Support for third-party sliders that export standard
Gcode, such as Superslicer, Prusaslicer, and Cura, but some
advanced features may not be supported.
Supported operating systems: macOS, Windows

Wi-Fi
Frequency range: 2412 MHz – 2472 MHz (CE)
2412 MHz – 2462 MHz (FCC)

2400 MHz – 2483.5 MHz (SRRC)
Transmitter power (EIRP): ≤ 21.5 dBm (FCC)
≤ 20 dBm (CE/SRRC)
Protocol: IEEE 802.11 b/g/n