3Dlac 80ml STICK adhesive
3DLAC Stick is an adhesive specifically designed to fix FFF/FDM 3D printed parts throughout the printing process, and its formula helps prevent possible errors such as distortion.
Highlights
- High level of fixation
- Fast drying
- Durability
- Works on multiple surfaces
Applications
3DLAC STICK can be applied to multiple surfaces you want to print on with 3D printers. Depending on each material, different adhesion is achieved, so we advise you to make preliminary tests before printing with certain technical materials. Take special care when removing parts, we recommend waiting until the substrate temperature is below 30°C, and if you do not remove the part, let it cool in the refrigerator and the part will release with just a light touch.
Instructions for use
- Shake the product before use.
- On a clean, dry surface, place the tube with the lid down and gently press the applicator against the hot bed for a few seconds to allow a small amount of product to flow out.
- Spread a thin, even layer over the print area for best results.
- Let the product dry and start printing.
- To remove the workpiece, wait for the print base to cool and remove it.
References
Store in a cool, dry place away from direct sunlight. Keep the cap closed after each use.
There are no reviews yet.