Creality FEP FILM – 266×190

FEP film with dimensions 266 x 190 mm, used in the following models of Creality 3D printers: LD-006, Halot-Sky and Halot-Lite. It is a consumable. Mounted on the bottom of the resin tank . Provides the high UV light transmittance (approximately 95%) required to cure the print material. The object of the sale is one FEP film.

Product description:FEP film for Creality 3D printers – 266 x 190 mm

FEP film with dimensions 266 x 190 mm, used in the following models of 3D printers Creality: LD-006, Halot-Sky and Halot-Lite . It is a consumable. Mounted on the bottom of the resin tank . Provides the high UV light transmittance (approximately 95%) required to cure the print material. The object of sale is one FEP film.

Stages of foil replacement

• First, remove the empty resin tank from the 3D printer
• Then remove the 14 screws to remove the old FEP film from the bottom of the resin tank
• Insert the new FEP film between the two steel frames
• The foil mounted between the two steel frames must be screwed to the tank again with 14 screws
• The last step is to re-mount the tub with the new film in the 3D printer
• FEP film should not be cleaned with sharp tools. This can scratch its surface.

Specification of FEP film

• Developer: Creality
• Spare part type: fEP film
• Compatible 3D printers Creality: LD-006, Halot-Sky, Halot-Lite
• Made in dust-free conditions
• Has a uniform, smooth surface
• UV transmittance: approximately 95%
• Ductility: 300%
• Thermal resistance: up to 200 °C
• Thickness: from 0.15 to 0.2 mm
• Dimensions: 266 x 190 mm