Anycubic Vyper

Anycubic Vyper

A big platform for big dreams

With a total surface area of > 90in²/60,000mm², Anycubic Vyper’s 245mm square build platform is 24% larger than competitors’ 220mm square platform. The larger printing platform brings greater freedom, allowing you to unleash your creativity freely.

For the freedom to do

Thanks to its large printing platform, the Anycubic Vyper can print up to 10.2 x 9.6 x 9.6 inches. / 260 x 245 x 245 mm at the same time, which is similar in size to a standard size 7 basketball. 4.1 gal. / 15,6 l total build volume leaves enough space and freedom for you to make any shapes of cubes.

Levelling is automatic

Leveling is the first step in 3D printing and a key step for ultimate success. The Anycubic Vyper is one of very few 3D printers that have an auto-leveling feature in the $400 USD price segment. Precise 16-point auto-leveling simultaneously greatly simplifies print preparation and improves print success rates.

Large screen, convenient operation

The 4.3-inch screen is 51% larger than the 3.5-inch screen; the LCD display is more colorful, transparent and brighter than a traditional TFT screen; the LCD touch control is more responsive than TFT and more intuitive than knob controls. Anycubic Vyper gives you the best viewing and working experience with its 4.3-inch LCD screen with touch control.

Print fast without waiting

Thanks to Bowden’s self-developed extruder, the Anycubic Vyper can reach a maximum print speed of 7.1 in/sec or 180 mm/sec and a typical print speed of 3.1 in/sec or 80 mm/sec, which is 167% faster than competitors’ 1.2 in/sec or 30 mm/sec and 33% faster than others’ 2.4 in/sec or 60 mm/sec. Equipped with a new 32-bit motherboard and a high-performance core control chip with Cortex -M3 architecture, Vyper features faster computing speed and a smoother system. The integration of the TMC2209 silent driver makes the motherboard have both silent printing and precise output voltage control, which provides more accurate and silent printing.

Assembly in minutes

Assembling a 3D printer is often time-consuming and labor-intensive. Anycubic Vyper uses a modular design with 4 basic pre-assembled modules. So, instead of wasting hours assembling small parts, the Anycubic Vyper can easily be assembled in minutes.

Removal with bare hands

Removing models from the heated bed with a steel shovel often leads to a dilemma: too much force can damage the model and the platform, while too little force cannot separate them. With Anycubic Vyper this will no longer be a problem. Thanks to the magnetic and flexible construction of the spring steel platform, you can easily remove models with your bare hands by simply removing the entire platform and then bending it.

Maintenance without worries

The carborundum glass platform often warps and becomes uneven after prolonged use and affects subsequent prints. To solve this problem, Anycubic Vyper chose PEI stainless spring steel, which can stay flat for decades, is also rust resistant and completely maintenance free.

Technical specifications

• Machine weight 10 kg
• Machine dimensions 516x508x457 mm (HWD)
• Print resolution ±0.1 mm
• Printing dimensions 260x245x245mm (HWD)
• Positioning accuracy X/Y 0.0125 mm; Z 0.002 mm
• Number of extrudersSingle
• Nozzle size0,4 mm
• Hot bed temperature≤230F/110℃
• Print speed≤180 mm/s (80 mm/s recommended)
• Operating ambient temperature8°C – 40°C
• Nozzle operating temperature≤260°C
• Hot bed operating temperature≤110°C
• Input voltage100V/240V AC, 60/50Hz
• Output voltage24 V/14.6 A (350 W)
• Printing materialPLA/ABS/PETG/TPU/wood
• Input formats .STL, .OBJ, .AMF
• Output formatsGCode
• Connection mode Trans-flash card; USB cable (for experienced users only)