PA6 Filament – Natural – Low Warp Spectrum

PA6 Filament – Natural – Low Warp Spectrum

Spectrum PA6 Low Warp is an extremely durable polycaprolactam-based construction material enhanced with additives to reduce the high shrinkage inherent in processing such materials.

Robust and wear resistant

Spectrum PA6 Low Warp is an extremely durable polycaprolactam-based construction material enhanced with additives to reduce the high shrinkage inherent in processing such materials. Some of the most important characteristics of Spectrum PA6 Low Warp filaments are: resistance to fuels and oils, high impact strength and very good mechanical properties.

The improved cohesion of the Spectrum PA6 Low Warp material allows a significant reduction of the “curl” effect (especially in the corners of the printed pattern). The reduction of this negative effect is related to the low shrinkage in processing at a level of 0.3%.

The additives used in the manufacture of Spectrum PA6 Low Warp make it a self-lubricating material, so it is possible to use the manufactured parts in applications where friction occurs. In addition, the printed parts will have good electrical insulating properties and will also exhibit physiological indifference.

In order to achieve the very attractive properties of Polyamide Low Warp, as far as technical aspects are concerned, you must follow the basic rules for storing such materials (in a dry and dark place with humidity below 15%). To obtain the best parameters of the printed object, it is recommended to dry the material before handling.

Key Features:

• Low shrinkage in processing
• high mechanical strength
• chemical resistance of lubricants and oils
• wide variety of applications
• very high adhesion between layers, which minimizes the risk of delamination

Applications:

• sliding bearings, scrapers, guide rollers operating at elevated temperatures
• sealing rings and plates with increased chemical and corrosion resistance
• end-use parts
• tooling
• functional prototyping

General information

Colour – Natural
Spectrum Colour Name – Natural
Diameter – 1.75mm
Dimensional Tolerance ± 0.03mm
Check your spool – view diameter stroke along entire spool length – YES
Density – 1.15 g/cm³
Net Weight – 500g
Total Weight – 900g

Recommended print settings

Printing temperature – 250-280°C
Heated bed – required
Heated bed temperature – 85-100°C
Printing speed – 30-70 mm/s
Closed chamber – Recommended

Dimensions reel

Outer diameter – 200 mm
Width – 55 mm
Inner diameter – 52 mm
Weight of empty spool ± 220g